Data Logging Degaussers

Hard Drive degaussers

Security degaussers

Hard Drive Destroyers

Media Disintegrator

Data/Computer Tape Erasers

Video Tape degaussers

Degausser Rental

Ex-Demonstration Units

Which Media To Erase

Compare degaussers

Not sure which degausser you require ? then Ask The Experts

Hard Drive Destroyers Model MHDD & MX2 Series

Manual &Motorised Hard Drive Destroyers

Light weight, compact and powerful Hard Drive Destroyers. With their low cost and versatility these destroyers are perfect for both government and commercial markets where tight budgets are an important consideration. 
FAST - COMPACT - POWERFUL - LIGHT WEIGHT - PORTABLE - VERSATILE
These small heavy-duty destroyers are maintenance free. No messy fluids or external components to deal with and no adjustments or calibrations necessary.

The MHDD-N Manually Operated Destroyer is NSA/CSS Approved and is extremely operator friendly. The user need only insert the hard drive into the slot, close the safety door and turn the easy to turn handle 8 rotations. The destroyer also pushes the hard drive out for easy removal. This simple operation takes approximately 8 seconds or less. 

The MX2-N Motor Operated Destroyer with Manual Feature is NSA/CSS Approved and enables the user to operate the unit hands free. Inserting the hard drive and closing the safety door automatically starts the destruction process, allowing destruction every 10 seconds (12 seconds for 50 Hz units). If power is interrupted the operator has the manual operated handle to continue. No interruption or setup. Simply grasp the handle and continue the operation manually. A feature none of the competition can claim.

The MX2-N with Universal Power Option gives the user additional versatility in all environments and operates in three power modes: Battery Power, AC Wall Power, or Manual. The battery holds a charge sufficient to destroy more than 100+ hard drives (double that with the optional battery pack).        

Model MHDD-N - NSA/CSS Approved Manually Operated


NSA/CSS Approved for Destruction of 1-inch, .65-inch, 1.65-inch & Laptop Drives
EXTREMELY Rugged & Affordable
Destroys HDD & SSD Drives
Used by DoD for hard drive destruction
The GREEN Solution - NO POWER Required
Compact, Light Weight & Portable - Only 49 lbs.
Safety Door
Debris Tray
FAST (8 seconds or less), SAFE & RELIABLE
Easy Hand Crank Operation
Rear Output Slide Option Available
Universal Mount Kit Available
Upgradeable to Motor Operation (Model MX2-N)
Transport & Storage Case Available
Rackmountable Slide-out Shelf Available

Model MX2-N NSA/CSS Approved Motor Operated with Manual Feature

NSA/CSS Approved for Destruction of 1-inch, .65-inch, 1.65-inch and Laptop Drives
EXTREMELY Rugged Design & Affordable
Destroys HDD & SSD Drives 
Dual Operation - Motor or Manual
Used by DoD for Hard Drive Destruction
The GREEN Solution to Hard Drive Destruction
Compact, Light Weight & Portable - Only 63 lbs.
Safety Door
Debris Tray
FAST (10 seconds or less), SAFE & RELIABLE
Rear Output Slide Option Available
Universal Mounting Kit Available
Transport and Storage Case Available
Rackmountable Slide-out Shelf Available

Model MX2-N with Universal Power (BAT) Option

ADDITIONAL FEATURES
Only Universal Powered Hard Drive Destroyer Available
Destroys 100+ Drives Under Battery Power
Internal Battery & Charger
External Battery Available
Battery, AC Wall Power & Manual Features
Ideal for use in Mobile Units, Embassies, Military Sites, Commercial Applications, etc.
Compact, Light Weight & Portable - Only 67 lbs.

 

The Model MHDD-N, and MX2-N, when in manual mode, are designed to require a minimal amount of manual exertion to turn the handle. 
The internal workings of the units press down on the drive, bending it approximately 90 degrees. This bend renders the hard drive useless by bending the platters, damaging the heads, motor and circuit board. To keep the speed at an optimum, the destroyers reset automatically. No time is wasted returning the blade to position or turning the handle backwards. 

Government specifications require that a hard drive needs to be destroyed so that no equipment or persons can spin or operate the drive. Physical destruction is preferred because it gives clear visible evidence that the hard drive is inoperable. The MHDD-N and MX2-N units easily meets these requirements and is an inexpensive alternative to expensive power destroyers and shredders. 

Meets Government Requirements: 

The Models MHDD-N and MX2-N are NSA/CSS Approved for the destruction of 1-inch, .65-inch, 1.65-inch and Laptop Drives. The also meet government compliance standards including: HIPAA, PIPEDA, GLBA, NIST, PCI DSS & more

SPECIFICATIONS
Model Numbers MHDD-N - Manual Operated Hard Drive Destroyer
MX2-N - Motor & Manual Operated Hard Drive Destroyer
Media Destroyed Handles all 3.5-inch Form-Factor Drives including .65-inch, 1-inch, and 1.65-inch. Handles 2.5-inch Laptop hard drives with the LTH option. Handles SSD (NOT NSA Approved for SSD) drives in 3.5 Form Factor and 2.5 Form Factor (with LTH Option). 

Options
LTH - Laptop Option & Holder (2.5" Form Factor Drives)
BAT - Universal Power Option - Adds BATTERY Feature
EBP - External Battery Pack (for units with BAT option)
CHG - Battery Charger (for units with EBP option)
ROS - Rear Output Slide
ATR - Autoloader & Slide with Rear Output (MX2-N Only)
RCC - Remote Control Communications (MX2-N Only)
CASE - Transport & Storage Case
EIA - Rackmountable Slide-out Shelf Option (for 19" EIA Racks, 19" to 28" deep, Includes Slides) 
MNT - Universal Screw Down Mounting Kit
Manual Operator Exertion (Manual Operation) Typical Commercial Drives (3.5") – Typically 4 lbs. exertion
Hardened (Heavy Shielded) (3.5") – Typically 12 lbs. exertion maximum
Power Supply  MX2: 100-240 VAC; Standard Voltages: 115 VAC, 60 Hz; 220 VAC, 60 Hz; 230 VAC, 50 Hz (Specify voltage and frequency when ordering)

MX2-N with Universal Power Option: 100-240 VAC, 50/60 Hz, Battery Power Feature; Optional Battery Pack

Operating Time Manual - 8 seconds or less (dependent on operator)
Motor - 60 Hz Units - 10 seconds 
Motor - 50 Hz Units - 12 seconds
Destruction Method O1 Hardened Steel Blade - Bends platters, damages heads, motor and circuit board
Physical Dimensions MHDD-N: 7 1/4" W x 9 1/4" D x 16 1/2" H (18.4 cm x 23.5 cm x 42 cm); 11" (28 cm) wide with handle

MX2-N: 7 1/4" W x 11 5/8" D x 21" H (18.4 cm x 29.5 cm x 53.3 cm)
11" (28 cm) wide with handle  

MX2-N with Universal Power (BAT) Option: 7 1/4" W x 11 5/8" D x 21.5" H (18.4 cm x 29.5 cm x 54.6 cm); 11" (28 cm) wide with handle  

Weight MHDD-N: 49 lbs. (22 kg)
MX2-N: 63 lbs. (28.6kg)
MX2-N with Universal Power (BAT) Option: 67 lbs (30.4 kg)
Shipping Information
MHDD-N
Shipping Weight - 63 lbs (28.6 kg) (depending on options ordered)
Shipping Dimensions: 28"x17"x17" (71.1 cm x 43.2 cm x 43.2 cm)

w/ CASE Option: Weight - 100 lbs (45.4 kg) (depending on options ordered) Shipping Dimensions: 31.3" x 24.2" x 17.9" (79.5 cm x 61.5 cm x 45.5 cm)

MX2-N
Shipping Weight - 84 lbs (38 kg) (depending on options ordered) 
Shipping Dimensions: 33"x17"x17" (83.8 cm x 43.2 cm x 43.2 cm)

w/ CASE Option: Weight - 128 lbs (58 kg) (depending on options ordered)
Shipping Dimensions: 33.3" x 24.4" x 18.3" (84.6 cm x 62 cm x 49 cm)

MX2-N with Universal Power (BAT) Option
Shipping Weight - 86 lbs (39 kg) (depending on options ordered) 
Shipping Dimensions: 33"x17"x17" (83.8 cm x 43.2 cm x 43.2 cm)

Maintenance Occasional vacuuming of debris drawer and internal housing
Operating Temperature Max. 176º F (80º C) Continuous Duty
Warranty 1 year Parts & Labor; 1-year warranty extension available; Lifetime Warranty on Bender
Patent Patent Pending with U.S.P.T.O.

 

 

We reserve the right to amend all specifications without notice.

With offices in the USA and Europe Eyecote has been providing equipment and services to the Data Recording, Entertainment and Media Manufacturing industries for more than 30 years.

Eyecote International Limited
Corporate Office
Singleton Court, Monmouth,
NP25 5JA. United Kingdom.
Tel: +44 1600 772433
E-mail:- sales@eyecote.com

Eyecote Media Services
USA Sales Office
705 Pleasant Valley Road, #112
Diamond Springs, CA 95619

Tel: 530-232-5415
E-mail:-usa-sales@eyecote.com